RearviewSafety RVS-020813 - Manual (Page 6)

rvs systems
6
Installation
Installation instructions for the camera:
1. In the proper position of rear license plate drill a screw hole for
mounting screw.
2. Use a screwdriver to the first screw is screwed into the screw
hole of the drilled.
3. move the camera orientation to adjust the display effect.
4. After adjustment, second screw drill, mount and tighten the
screws, the camera is installed.
Installation instructions for the WiFi transmitter:
When the camera is fixed, put the lead wire of the camera
through the car trunk.