RearviewSafety RVS-4000 - Manual (Page 11)

11
HARDWARE INSTALLATION cont’d
4) Install Remote Control onto dash next to the steering wheel
and within reach of the driver.
5) Run remote & camera cable(s) and secure in headliner or
other area so no cables are exposed. Use provided wire clips if
necessary. Cables should enter through rear of the locking case.
6) Connect all cables to BX4000 Recorder
Make sure cables go
through this opening
Camera 1 Input
Remote Control Input
GPS Input
Power Input &
Alarm trigger cables
Channel 4
input (optional)
Camera 3 Input
(optional)
External Mic input
(optional)
Camera 2 Input
(optional)
LCD monitor
Connection
(optional)
SD card input (32GB)