Slide number 10, Hardware installation – RearviewSafety RVS-4000 User Manual

Page 10

Text mode
Original mode

HARDWARE INSTALLATION

1) Insert BX4000 Recorder into locking case
*If no locking case, use provided Velcro adhesive

2) Find installation location for Recorder & locking case (i.e glove
box, under dash, trunk, etc.).

3) Install the interior and exterior cameras with 3M dual sided
adhesive to the windshield as seen below. Ch 1-3 provide 5V
power to the following cameras: STR-100/IR, DTR-100, STC-300

Exterior Camera

Interior Camera

Screw holes for mounting