Pro-Tools EMN-510 - Manual (Page 10)

“GODZILLA” END MILL NOTCHER
CHANGING CUTTERS
QUALITY PRODUCTS MADE BY PEOPLE WHO CARE PRO-TOOLS (813) 986-9000
PAGE 10
SET SCREWS
TO CHANGE CUTTERS, YOU WILL NEED TO USE AN ALLEN WRENCH TO LOOSEN
SET SCREWS INDICATED ABOVE. SLIDE CUTTER OUT AND REPLACE.
IMPORTANT!!!!
SMALLER CUTTERS WILL REQUIRE AN INSERT THAT YOU CAN ORDER FROM
OUR SALES STAFF. THE INSERT SLIP OVER THE CORRESPONDING CUTTER
AND THEN SLIDE INTO SHAFT ADAPTER. USE THE SAME SET SCREWS TO TIGHTEN.