Cooper Lighting Impact FloodLight - Manual (Page 3)

TM
<<< MM Impact Flood Medium
H O U S I N G
Rugged one-piece die-cast aluminum housing will endure the
toughest environments while maintaining precise tolerance
control. Housing incorporates a one-piece extruded silicone
gasket that seals the optical/electrical compartment from
external moisture and contaminants, achieving an exceptional
IP65 rating.
D O O R
Die-cast aluminum door features integral hinging and
recessed tamper resistant stainless steel allen head
fasteners. Door frame features an integral accessory
channel for the mounting of a wide array of optional vandal
and light control accessories. The door lens is 0.2" thick,
impact resistant, clear flat tempered glass sealed to the door
with a one-piece silicone gasket.
O P T I C A L A S S E M B LY
Available in horizontal or vertical lamp orientations, high
efficiency optical systems are formed from premium
reflective sheet aluminum. Medium housing optics feature
mogul-base lampholders while small housing optics feature
medium-base lampholders.
M O U N T I N G
Heavy-duty die-cast aluminum knuckle utilizes tooth-lock
adjustment mechanism for both solid engagement and easy
aiming adjustment. Knuckle adjustment is made via one (1)
captive stainless steel allen head fastener consistent with
door frame fasteners. Knuckle tested to safely sustain 3G
of vibration. The medium housing knuckle slip-fits over a
standard 2" pipe (2 3/8" O.D.) tenon while the small housing
knuckle features a 3/4" NPT nipple for rigid attachment to
available mounting accessories. Optional heavy-gauge
adjustable steel trunnion mount provides additional
durability when required (available on “MS” only).
F I N I S H
Housing, door and mounting finished in a 5 stage premium
TGIC polyester powder coat paint, 2.5 mil nominal thickness
for superior protection against fade and wear. Standard color
is bronze. Optional black, white, and grey
finishes are available.