beautypg.com

Cooper Lighting Sure-Lites Chel Series User Manual

Cooper lighting - sure-lites, Chel series, Chel1

background image

679

CHICAGO CODE

COOPER LIGHTING

COOPER LIGHTING - SURE-LITES

®

D I M E N S I O N S

6.5”

[165mm]

11.5”

[292mm]

• Dual Voltage input,

120/277 VAC, 60 Hz

• Die cast aluminum housing

• Two 6V 12W MR16 lamps

• Sealed Lead Calcium

• Powder Coat Finish

• Watchguard EMS

Self-Diagnostic System

• Photocell Test Switch

(requires accessory LASER
for activation)

• UL924 Listed, Damp

location listed, Life Safety
NFPA 101, NEC/OSHA,
most state and local codes

• City of Chicago Fire Code

D E S C R I P T I O N

The Sure-Lites CHEL Emergency Light
provides a distinct solution to any

emergency lighting application.
Constructed of die cast aluminum, the
CHEL presents not only a unique shape
and design but also provides dependable
strength and durability. The two, fully
adjustable, high efficiency 12W MR16
lamps provide maximum path of egress
performance. The standard Watchguard
EMS self-diagnostic system meets NFPA
101 testing requirements providing
assurance that the unit is working
properly at all times. The Sure-Lites
LASER test feature allows remote, 30
second confidence testing of the
emergency light upon demand.

CHEL SERIES

D i e C a s t A l u m i n u m

C H I C A G O C O D E

E M E R G E N C Y L I G H T I N G

4.0”

[102mm]

O R D E R I N G I N F O R M AT I O N

S A M P L E N U M B E R : 6 C H E L 1 S D

Family
CHEL1
=Architectural

Emergency
Light

CHEL1

Housing
Finishes
Blank
=Silver
BK=Black
WH=White

Accessories (order separately)

LASER=Key Chain, Red Laser Pointer
(activation tested at 30 feet)

SD

SD=Self Diagnostics

(Standard)

E L E C T R I C A L R AT I N G S

Model

DC Voltage

1 1/2 Hours

CHEL1SD

6

24

Rated Wattage

to 87 1/2% of Rated D.C. Voltage

Lamp Information

Type

Wattage

Number

Spacing

1

MR16

12

29-140

50'

Options

TDM=Time Delay Monitor

(1)

The "Rule of Thumb" spacing guidelines are designed to achieve 1 foot-candle average and 0.1 foot-candle minimum with a 40:1
maximum/minimum ratio. The corridor used is 100 feet long, 9 foot ceiling with a 6 foot wide walkway and 3 foot path of egress.
The reflectances are 80% ceiling, 50% walls and 20% floors. The fixture mounting height is 7.5. Cooper Lighting assumes no responsibility
for local requirements or specific project variables. This is a guideline to be used as a design aid, not as guarantee of any code compliance.

S e l f - D i a g n o s t i c s

The self-diagnostic unit will automatically
perform all tests required by UL924 and NFPA
101. The system indicates the status of the unit at
all times using the LED indicator near the test
switch on the side of the unit. A 90 minute battery
power (emergency mode) simulation test will
occur randomly once every six months.

A 30 second battery power simulation test will
occur every 30 days.