Dell POWEREDGE M905 - Manual (Page 147)

Instrukcja uruchomienia
145
Krok 2:
Now we need to setup your initial privilege (Level 15) user
account. This account is used to login to the CLI and Web
interface. You may setup other accounts and change privilege
levels later. For more information on setting up user accounts
and changing privilege levels, see the user documentation.
To setup a user account:
Please enter the user name: admin
Please enter the user password: ********
Please reenter the user password: ********
Krok 3:
Next, an IP address is setup. The IP address is defined on the
default VLAN (VLAN #1), of which all ports are members. This is the
IP address you use to access the CLI, Web interface, or SNMP
interface for the switch.
Optionally you may request that the system automatically retrieve
an IP address from the network via DHCP (this requires that you
have a DHCP server running on the network).
To setup an IP address:
Please enter the IP address of the device (A.B.C.D) or enter "DHCP"
(without the quotes) to automatically request an IP address from
the network DHCP server.
192.168.2.1
Please enter the IP subnet mask (A.B.C.D or /nn):
255.255.255.0
Krok 4:
Finally, set up the gateway. Please enter the IP address of the
gateway from which this network is reachable
192.168.1.1
This is the configuration information that has been collected:
SNMP Interface = "public"@192.168.2.1
User Account setup = admin
Password = **********
Management IP address = 192.168.2.1 255.255.255.0
Gateway = 0.0.0.0
JR183.book Page 145 Thursday, June 7, 2007 1:54 PM