Clarion FZ709E - Manual (Page 9)

13
English
FZ709E
Basic Operations
When “BASS BOOST”/“IMPACT”/
“EXCITE” is set:
“BASS BOOST”/“IMPACT”/“EXCITE” will appear
after the “BEAT EQ” item in the sound Adjust-
ment mode.
3 - 3 - 1 . Select the item and touch [ ] key to enter
detail setting stage.
3 - 3 - 2 . Slide along [ ] slider or touch [ ]/[ ]
key to adjust the setting in the range of -3
to +3.
∗ The factory default setting is “0”.
3 - 3 - 3 . After completing settings, touch the [ENT]
key to return to the 1 st selected item.
When “CUSTOM” is set:
3 - 3 - 1 . Slide along [ ] slider or touch [ ]/[ ]
key to select the “BASS”, “MID” or “TRE-
BLE” mode to adjust.
3 - 3 . Touch [ ] / [ ] key to select Gain(“G”),
center frequency(“F”) or Q factor(“Q”).
3 - 4 . Slide along [ ] slider or touch [ ]/[ ]
key to adjust the value.
∗ The factory default setting:
G : “0” (Adjustment range: +7 to -7)
F : “50Hz” (Adjustment range: 50/100/200)
Q : “1.0” (Adjustment range: 0.7/1.0/1.4/2.0)
Adjusting the bass
This adjustment can be performed only when the
BEAT EQ is set to “CUSTOM”.
3 - 1 . Select “BASS”.
3 - 2 . Touch [ ] key to enter detail setting stage.
3 - 5 . After completing settings, touch the [ENT]
key to return to the 1 st selected item.
3 - 3 . Touch [ ] / [ ] key to select Gain(“G”),
center frequency(“F”) or Q factor(“Q”).
3 - 4 . Slide along [ ] slider or touch [ ]/[ ]
key to adjust the value.
∗ The factory default setting:
G : “0” (Adjustment range: +7 to -7)
F : “500Hz” (Adjustment range: 500/1k/2k)
Q : “1.0” (Adjustment range: 0.7/1.0/1.4/2.0)
Adjusting the mid
This adjustment can be performed only when the
BEAT EQ is set to “CUSTOM”.
3 - 1 . Select “MID”.
3 - 2 . Touch [ ] key to enter detail setting stage.