22 english, Radio data system operations, Auto store function for tp stations – Clarion FZ709E User Manual
Page 18: Switching the pty display language
22
English
FZ709E
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP can be
received less than 6, broadcast stations already
stored in memory and left without being overwrit-
ten.
3
- 1 .
As
lit in the display, select “AUTO
STORE”.
3
- 2 .
Touch [ENT] key to start performing auto
store function.
3
- 3 .
The stations with good reception are stored
automatically to the preset channels.
∗
Even if you select FM1 or FM2, a TP station
is stored into memory for FM3.
Switching the PTY display language
You can select one of 4 languages (English,
Deutsch, Svenska, Francais) for the PTY dis-
played in the display.
∗
The factory default setting is “English”.
3
- 1 .
Select “LANGUAGE”.
3
- 2 .
Touch [ ] key to enter detail setting stage.
3
- 3 .
Slide along [ ] slider or touch [ ]/[ ]
key to select desired language.
3
- 4 .
After completing settings, touch the [ENT]
key to return to the 1
st
selected item.
Radio Data System Operations
Notes:
This function is disabled when a national station
such as BBC R2 is being received.
The REG function ON/OFF setting is valid when
the AF function is ON.
3
- 1 .
Select “REG”.
3
- 2 .
Touch [ ] key to enter detail setting stage.
3
- 3 .
Slide along [ ] slider or touch [ ]/[ ]
key to select “ON” or “OFF”.
3
- 4 .
After completing settings, touch the [ENT]
key to return to the 1
st
selected item.
OFF
“REG” in the display goes off and REG
function turns off.
Manually tuning a regional station in
the same network
1. This function is valid when the AF func-
tion is ON and the REG function is OFF.
Note:
This function can be used when a regional
broadcast of the same network is received.
2. Slide along [ ] slider or touch [ ]/[ ]
key to call out the regional station.
3. If the reception condition of the called out
station is bad, slide along [ ] slider or
touch [ ]/[ ] key to select the same
number. The unit receives a local station
on the same network.
ON
“REG” in the display lights and REG function
turns on.