Clarion FZ709E - Manual (Page 10)

14
English
FZ709E
Setting the BBE MP (Sound
Enhancement and Restoration for
compressed audio files)
BBE MP (Minimized Polynomial Non-Linear Sat-
uration) Process improves digitally compressed
sound, such as MP3, by restoring and enhancing
the harmonics lost through compression. BBE
MP works by regenerating harmonics from the
source material, effectively recovering warmth,
detail and nuance.
∗ This function is effective for the audio files in the
USB/iPod mode, but it is ineffective for the video
in the USB/iPod mode.
3 - 1 . Select “BBE MP”.
3 - 2 . Touch [ ] key to enter detail setting stage.
3 - 3 . Slide along [ ] slider or touch [ ]/[ ]
key to select the value in sequence of
“OFF” “ON”
∗ The factory default setting is “OFF”.
Basic Operations
3 - 3 .
Touch [ ] / [ ] key to select Gain(“G”),
center frequency(“F”) or Q factor(“Q”).
3 - 4 . Slide along [ ] slider or touch [ ]/[ ]
key to adjust the value.
∗ The factory default setting:
G : “0” (Adjustment range: +7 to -7)
F : “10kHz” (Adjustment range: 5k/10k/15k)
Q : “1.0” (Adjustment range: 0.7/1.0/1.4/2.0)
3 - 5 . After completing settings, touch the [ENT]
key to return to the 1 st selected item.
Adjusting the treble
This adjustment can be performed only when the
BEAT EQ is set to “CUSTOM”.
3 - 1 .
Select “TREBLE”.
3 - 2 .
Touch [ ] key to enter detail setting stage.
3 - 5 . After completing settings, touch the [ENT]
key to return to the 1 st selected item.