Connecting the keyboard, mouse, and monitor, Connecting the power – Dell PowerVault NX1950 User Manual

Page 8

Text mode
Original mode

Getting Started With Your System

Connecting the Keyboard, Mouse, and Monitor

Connect the keyboard, mouse, and monitor (optional).

The connectors on the back of your system have icons indicating which cable to plug into each
connector. Be sure to tighten the screws (if any) on the monitor's cable connector.

NOTE:

If you simultaneously connect two monitors to the system, using the front and rear video

connections, the video will default to the front since only one display can operate at a time.

Connecting the Power

Connect the system’s power cable(s) to the system.

Plug the other end of the cable into a grounded electrical outlet or a separate power source
such as an uninterrupted power supply (UPS) or a power distribution unit (PDU).