Stopping the engine, Stopping the engine -8 – Cub Cadet SC2400 User Manual

Page 41

Sc2400 Operator’s Manual

1. Remove foot from the forward and

reverse drive pedal.

2. After the tractor has completely

stopped, turn off the Power Take Off
(PTO) switch, lower the implement (if
installed) to the ground and then
engage the parking brake securely.

3. Run the engine at a lowest possible

speed for at least 2 minutes.

4. Turn the key to the OFF position.
5. Remove the key from the starter key

switch.

6. Make sure that the engine and other

components have stopped running.
NEVER leave the operator’s seat
while any components are running.

(A) Forward and reverse drive pedal
(B) Throttle control lever
(C) Power Take Off (PTO) switch

2. Stopping the Engine

3013703a

(B)

(A)

3014919c

(C)