Cub Cadet SC2400 User Manual

Page 104

Sc2400 Operator’s Manual

7. Blow air through the element from the inside out

using 42 to 71 psi (0.29 to 0.49 MPa, 3.0 to 5.0
kgf/cm

) compressed air to remove the

particulates. Use the lowest possible air pressure
to remove the dust without damaging the
element.

8. Replace the element with a new one if the

element is damaged, excessively dirty or oily.

9. Clean inside of the air cleaner canister and

canister cover.

10.Reinstall the air cleaner element.
11.Replace the air cleaner canister cover. Make sure

that the rubber dust unloading valve points
downward.

12.For correct installation, follow the instruction

molded onto the canister cover.

13.Hook the two latch hooks onto the air cleaner

canister.

14.Push the top of the latches inward toward the

canister cover to lock the latches and secure the
canister cover.