Preparing the stored tractor for operation, Preparing the stored tractor for operation -3 – Cub Cadet SC2400 User Manual
Page 127
Sc2400 Operator’s Manual
1. Check the tire pressure. If necessary, refill with compressed air.
2. Check the levels of engine oil, transmission/hydraulic oil and engine
coolant.
3. Check the battery electrolyte level.
4. Check that the battery is adequately charged.
5. Install the battery.
6. Check the fan belt tension.
7. Lubricate all the grease fittings.
8. If the tractor has a fuel shut-off valve, open it.
9. Run the engine for 5 minutes while the mower or any implement is
disengaged to allow the oil to be fully distributed throughout the entire
engine. After stopping the engine, walk around the tractor and check for
any evidence of oil or other leakage.
10. Make sure that all the shields, guards or deflectors are in place.
2. Preparing the Stored Tractor for Operation
- 7284 (89 pages)
- 7284 (52 pages)
- 72-inch (32 pages)
- ST23 (42 pages)
- 18.5HP Z-Force 42 (56 pages)
- TANK M54 (4 pages)
- LT1024 (28 pages)
- LT1024 (28 pages)
- 454 (20 pages)
- LT1050 (40 pages)
- 23Hp Tank 23BB5DBW150 (32 pages)
- 190-670-100 (12 pages)
- 01008371 15HP Z-Force 44 (54 pages)
- CC 500 (2 pages)
- CC4065 (44 pages)
- 190-192-190 (12 pages)
- PR-521 (16 pages)
- I1042 (36 pages)
- I1042 (56 pages)
- 439 (16 pages)
- 1000 Series (1 page)
- Fabricated Deck InDirect Injection Diesel (32 pages)
- 20HP ENFORCER 44 EN (32 pages)
- Z-FORCE 48 (2 pages)
- 7252 (48 pages)
- 7252 (52 pages)
- EX SERIES EX2900 (2 pages)
- THE TANK M48 (4 pages)
- H 1748 (2 pages)
- CC4025 (88 pages)
- LT1022 (28 pages)
- E977C (36 pages)
- RZT 50VT (2 pages)
- RZT 50 (56 pages)
- Series 390 (20 pages)
- 53AB5JEX750 (36 pages)
- 8404 (289 pages)
- 8354 (56 pages)
- EX450 (4 pages)
- 53AJ8CTX750 (32 pages)
- 7232 D (2 pages)
- Ex32002 (182 pages)
- 5254 (52 pages)
- Time Saver (16 pages)
- Zero-Turn Commercial Riding Mower Professional Turf Equipment (36 pages)