Clarion XDZ616w - Manual (Page 22)

26
XDZ616
English
Digital Radio / DAB Operations
Note: Be sure to read this chapter referring to the front diagrams of chapter “3.CONTROLS” on page 5 (unfold).
DAB control function
When a CeNET cable is used to connect a DAB
(sold separetely), all functions can be operated.
Listening to the DAB station
1. Press FNC button 3 to select DAB mode.
2. When the unit receives a DAB station, the
display changes in the following order:
Frequency channel ➜ service label
Switching displays
Press the DISP button for 1 second during the
Main (service label) display to select Main (ser-
vice label) or Sub (PTY).
Note:
• The display shown in the normal reception mode
and the preset reception mode is the same when
a DAB station is received.
3. When the unit does not receive a DAB sta-
tion, the display changes in the following or-
der:
–Normal reception mode–
–Preset reception mode–
Notes:
• The number of programmes and broadcasting
times depend on the DAB stations.
• When the strength of DAB signals is weak, audio
output is muted.
Seek tuning
1. Press FNC button 3 to select DAB mode.
2. Press and hold right or left for 1 second or
longer using SEARCH button % .
∗
“SEEK” appears in the display.
3. “DAB” lights up in the display when the main
unit receives a DAB station.
∗
The main unit stops the seek tuning when it
cannot find a DAB station. The display returns
to the previous mode.
Manual tuning
1. Press FNC button 3 to select DAB mode.
2. Press and hold BND button ! for 1 second or
longer. “MANU” lights up in the display.
3. Press the right or left SEARCH button % to
select a station.
∗
If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
Switching programmes
1. Press FNC button 3 to receive a DAB sta-
tion.
2. Press the right or left SEARCH button % to
switch programmes in the DAB station.
Note:
• The programme name may be the same depending
on DAB programmes.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when you
want to search for a desired programme.
1. Press FNC button 3 to receive a DAB station.
2. Perform the following operation depending on
the connected model.
Press SCN button 4 . “SCAN” lights up and
the unit starts scanning each programme for
10 seconds sequentially. Each time the main
unit scans, the programme name is shown in
the display.
3. To stop programme scan when a desired
programme is tuned in.
Press SCN button 4 .