Clarion XDZ616w - Manual (Page 17)

XDZ616
21
English
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired
frequency.
1. Press BND button ! and select the desired
band (TV1 or TV2).
∗
If “MANU” is not lit in the display, press and
hold BND button ! for 1 second or longer.
“MANU” lights in the display and manual tun-
ing is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the right or left side of
SEARCH button
% for 1 second or longer to
tune in a station.
● Step tuning:
Press the right or left side of SEARCH button
% to manually tune in a station.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favor-
ite TV stations and store them in memory for later
recall.
1. Press BND button ! and select the desired
TV band (TV1 or TV2).
2. To recall a stored TV station, press the de-
sired Preset button 8 to select that station.
∗
Press and hold one of the Preset buttons 8
for 2 seconds or longer to store the current sta-
tion into the preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the Preset buttons 8
for 2 seconds or longer to store the current
station to that preset memory.
TV Operations
Auto store
Auto store selects 6 TV stations automatically and
stores each one into a preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain and
only the strong stations are stored into memory.
1. Press BND button ! and select the desired
TV band (TV1 or TV2).
2. Press and hold AS button 4 for 2 seconds or
longer. The stations with good reception are
automatically stored to the Preset buttons
8 .
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for desired TV station in memory.
1. Press PS button 4 .
2. When the desired station is found, press PS
button 4 again to remain tuned to that sta-
tion.
Note:
• Do not press and hold PS button
4 for 2 seconds
or longer. Doing so will trigger the auto store func-
tion and start storing stations into memory.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press and hold ADJ button 2 for 1 second or
longer to switch to the adjustment selection
display.
2. Press the right or left side of SEARCH button
% to select “TV DIVER”.
3. Press ENT button # .
4. Turn the Rotary knob $ clockwise to set to
“ON” or counterclockwise to set to “OFF”.
ON:
Sets reception emphasizing the visual.
OFF:
Sets the diver setting to OFF.
5. Press ENT button # .
6. Press ADJ button 2 to return to the previous
mode.