beautypg.com

Dell Inspiron B120 User Manual

Page 38

background image

 

Installing the Microprocessor Thermal-Cooling Assembly

 

1.

Lower the microprocessor thermal-cooling assembly into place on top of the microprocessor, aligning the numbered screws, labeled "1" through "4,"
with the numbers on the fan assembly, and the arrow on the pull-strap pointing toward the outside edge of the system board.

 

2.

Tighten the four captive screws, labeled "1" through "4," in consecutive order.

 

3.

Replace the thermal-cooling/microprocessor cover and tighten the screws.

Back to Contents Page

 

NOTICE:

Before you install the replacement microprocessor thermal-cooling assembly, remove the mylar that covers the thermal grease on the

assembly.