Dell OptiPlex 9010 All In One (Mid 2012) - Manual (Page 54)

Option Description
ImageServer Port Allows you to specify the primary IP port of the ImageServer, which is used by the
client to communicate. The default IP port is 06910.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer.
Client DHCP Specifies how the client obtains the IP address.
• Static IP
• DHCP (selected by default)
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer.
Client IP Displays the static IP address of the client. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Client DHCP is
set to Static IP.
Client SubnetMask Displays the subnet mask of the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Client DHCP is
set to Static IP.
Client Gateway Displays the gateway IP address for the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Client DHCP is
set to Static IP.
License Status Displays the current license status.
Table 12. System Logs
Option Description
BIOS events Displays the system event log and allows you to clear the log.
• Clear Log
System Setup Options (For Windows 8 only)
NOTE: Before proceeding download and install the latest BIOS version from support.dell.com
Table 13. General
Option Description
System Information Displays the following information:
• System Information — Displays BIOS Version,
Service Tag, Asset Tag, Ownership Tag,
Manufacture Date, Ownership Date, and the
Express Service Code.
54