Dell OptiPlex 9010 All In One (Mid 2012) - Manual (Page 53)

Option Description
• Trusted Execution - This option is disabled by default.
Table 9. Wireless
Option Description
Wireless Switch This option determines which wireless device can be controlled by the Wireless
Switch.
• WWAN
• WLAN
• Bluetooth
Wireless Device Enable This option allows enabling/disabling of internal wireless devices.
• WWAN
• WLAN
• Bluetooth
Table 10. Maintenance
Option Description
Service Tag Displays the service tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option
is not set by default.
SERR Messages Controls the SERR message mechanism. Some graphics cards require that the SERR
message mechanism be disabled.
• Enable SERR Messages (selected by default)
Table 11. Image Server
Option Description
Lookup Method Specifies how the ImageServer looks up the server address.
• Static IP
• DNS (selected by default)
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer.
ImageServer IP Displays the primary static IP address of the ImageServer with which the client
software communicates. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Lookup
Method is set to Static IP.
53