Dell OptiPlex 9010 All In One (Mid 2012) - Manual (Page 17)

4. Install the:
a) back cover
b) VESA stand
5. Follow the procedures in After Working Inside Your Computer .
Removing the System-Board Shield
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the:
a) VESA stand
b) back cover
c) VESA mount bracket
3. Remove the screws that secure the system-board shield to the computer. Lift the system-board shield away from
the computer.
Installing the System-Board Shield
1. Align and place the system-board shield on the back of the computer.
2. Tighten the screws that secure the system-board shield to the computer.
3. Install the:
a) VESA mount bracket
b) back cover
c) VESA stand
4. Follow the procedures in After Working Inside Your Computer .
Removing the Coin-Cell Battery
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the:
a) VESA stand
b) back cover
17