Dell S300 Projector User Manual

Page 65

Troubleshooting Your Projector

The image is stretched when

displaying a 16:9 DVD

The projector automatically detects the input

signal format. It will maintain the aspect ratio

of the projected image according to input

signal format with an Original setting.
If the image is still stretched, adjust the aspect

ratio in the Set Up menu in the OSD.

Image is reversed

Select Set Up from the OSD and adjust the

projector mode.

Lamp is burned out or makes

a popping sound

When the lamp reaches its end of life, it may

burn out and may make a loud popping sound.

If this occurs, the projector does not turn back

LAMP light is solid amber

If the LAMP light is solid amber, replace the

lamp.

LAMP light is blinking amber If the LAMP light is blinking amber, Lamp

module connection may be disrupted. Please

check the lamp module and ensure that it is

properly installed.
If the LAMP light and the Power light are

blinking amber, the lamp driver has failed and

the projector will automatically shut down.
If the LAMP and TEMP light are blinking

amber and the Power light is solid blue, the

color wheel has failed and the projector will

automatically shut down.
To clear the protection mode, press and hold

the POWER button for 10 seconds.

TEMP light is solid amber

The projector has overheated. The display

automatically shuts down. Turn the display on

again after the projector cools down. If the

problem persists, contact Dell™.

Problem

(continued)

Possible Solution

(continued)