Network – Dell S300 Projector User Manual

Page 42

Using Your Projector

NETWORK

The Network menu allows you to configure the network connection settings.

DHCP A

DDRESS

—If a DHCP server exists in the network to which the projector is

connected, the IP address will automatically be acquired when you select DHCP

On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Use

to select the number of IP Address, Subnet Mask, and Gateway. Key in

Enter to confirm each number and then use

to set the next item.

IP A

DDRESS

—Automatically or manually assigns the IP address to the projector

connected to the network.
S

UBNET

ASK

—Configure the Subnet Mask of the network connection.

ATEWAY

—Check the Gateway address with your network/system administrator if

you configure it manually.
DNS—Check the DNS Server IP address with your network/system administrator

if you configure it manually.
S

TORE

—Press

to save the changes made in network configuration settings.

NOTE:

1 Use

and

button to select IP Address, Subnet Mask, Gateway, DNS and

Store.

2 Press the

button to enter IP Address, Subnet Mask, Gateway or DNS to set

the value. (The selected option is highlighted in yellow)
a

Use

and

button to select the option.

Use

and

button to set the value.

After the setup is complete, press the

button to exit.

3 After the IP Address, Subnet Mask, Gateway and DNS is set up, select Store

and press the

button to store the settings.