Dell S300 Projector - Manual (Page 28)

28 Using Your Projector
5 Laser Point the remote control at the screen, press and
hold the laser button to activate the laser light.
CAUTION: Do not look at the laser point when
it is active. Avoid directing the laser light on
your eyes.
6 Aspect Ratio Press to change aspect ratio of a displayed image.
7 Keystone adjustment Press to adjust image distortion caused by tilting the
projector (+40/-35 degrees).
8
Page up Press to move to previous page.
NOTE: The Mini USB cable must be
connected if you want to use the Page Up
feature.
9 Page down Press to move to next page.
NOTE: The Mini USB cable must be
connected if you want to use the Page Down
feature.
10 Keystone adjustment Press to adjust image distortion caused by tilting the
projector (+40/-35 degrees).
11 S-Video Press to choose S-Video source.
12 Video Press to choose Composite Video source.
13 Video mode The projector has preset configurations that are
optimized for displaying data (presentation slides)
or video (movies, games, etc.).
Press the Video Mode button to toggle between
Presentation mode, Bright mode, Movie mode,
sRGB, or Custom mode.
Pressing the Video Mode button once will show the
current display mode. Pressing the Video Mode
button again will switch between modes.
14 Blank screen Press to hide/unhide the image.
15 Up Press to navigate through the On-Screen Display
(OSD) Menu items.
16
Left
Press to navigate through the On-Screen Display
(OSD) Menu items.