Tv tuner card (optional), Removing the tv tuner card, Replacing the tv tuner card – Dell Studio XPS 1645 (Late 2009) User Manual
Page 47

Back to Contents Page
TV Tuner Card (Optional)
Dell™ Studio XPS™ 1640 Service Manual
Removing the TV Tuner Card
1.
Follow the instructions in
Before You Begin
.
2.
Remove the palm rest (see
Removing the Palm Rest
).
3.
Remove the screw that secures the TV tuner card.
4.
Make note of the routing and disconnect the TV tuner card cable from the connectors on the card and the system board.
5.
Lift the TV tuner card and the cable off the computer base.
Replacing the TV Tuner Card
1.
Place the TV tuner card in the computer base.
2.
Replace the screw that secures the TV tuner card.
3.
Place the TV tuner card cable in the routing guide and connect it to the connectors on the card and the system board.
4.
Replace the palm rest (see
Replacing the Palm Rest
).
Back to Contents Page
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not
covered by your warranty.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working inside the
computer.
NOTE:
The availability of the TV Tuner card varies according to region.
1 TV tuner card cable 2 TV tuner card
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.