Dell Latitude C600 - Manual (Page 18)

18 Removing and Replacing Parts
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m 2 Push down on the drive door until it snaps into place.
3 Replace the M3 x 5-mm screw in the hard drive door.
Memory Module
M e m o r y M o d u l e C o v e r
Removing the Memory Module Cover
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing
the following procedure.
1 Remove the memory module cover:
a Use a coin or flat-blade screwdriver to release the two captive
screws that secure the memory module cover.
b Place your finger under the cover at the indentation and lift and
slide the cover open.