Dell Inspiron Zino HD (410, Mid 2010) - Manual (Page 43)

Replacing the Top Bracket
1. Follow the procedures in Before You Begin .
2. Align the tabs on the top bracket with the slots on the chassis.
3. Replace the two screws that secure the top bracket to the chassis.
4. Align the screw holes on the wireless antennas with the screw holes on the top bracket.
5. Replace the two screws that secure the wireless antennas to the top bracket.
6. Replace the top cover (see Replacing the Top Cover ).
7. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
1 screw (2) 2 top bracket
3 tabs (4)
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.