Dell PowerEdge C410x - Manual (Page 14)

Product Overview | 14
Static / Dynamic IP Switch Function Instruction
 To switch from DHCP to static or vice versa:
 Hold down the ID button for 5 seconds
 While pressing the ID button, press and hold the power button for 5 seconds
 Release the power button, and then the ID button
 It will take ~30 seconds to change the configuration
 The ID light will indicate which mode has been selected:
- Solid for 5 seconds indicates static IP
- Flashing for 5 seconds indicates DHCP
 If the default IP address is changed, switching DHCP to static IP will change the IP address back to the
default.
 Default IP address is 192.168.0.120