Dell Inspiron 10z (1120, Mid 2010) - Manual (Page 23)

6. Lift the display panel off the display back cover.
7. Turn the display panel over and place it on a clean surface.
8. Peel the tape covering the display cable and lift the display cable off the back of the display panel.
9. Lift the tape that secures the display cable to the display cable connector and disconnect the display cable.
Replacing the Display Panel
1. Follow the instructions in Before You Begin .
2. Connect the display cable to the display cable connector and secure it with the tape.
3. Place the display cable on the back of the display panel and secure it with the tape.
4. Turn the display panel over and place it on the display back cover.
5. Connect the camera cable to the connector on the camera module.
6. Replace the four screws that secure the display panel to the display back cover.
1 camera cable connector 2 display panel
3 screws (4)
1 back of the display panel 2 display cable
3 display cable connector 4 tape