Ac adapter connector, Removing the ac adapter connector – Dell Inspiron 1122 (M102z, Early 2011) User Manual
Page 2
Back to Contents Page
AC Adapter Connector
Dell Inspiron 1122 Service Manual
Removing the AC Adapter Connector
Replacing the AC Adapter Connector
Removing the AC Adapter Connector
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Follow the instructions from
step 4
to
step 6
in
Removing the Hard Drive
.
5.
Remove the palm rest (see
Removing the Palm Rest
).
6.
Remove the display assembly (see
Removing the Display Assembly
).
7.
Remove the middle cover (see
Removing the Middle Cover
).
8.
Remove the audio board (see
Removing the Audio Board
).
9.
Lift and remove the bracket off the computer base as shown in the illustration.
10.
Disconnect the AC adapter connector cable from the connector on the system board.
11.
Make note of the cable routing and carefully dislodge the AC adapter connector cable from the routing guides.
12.
Lift the AC adapter connector off the computer base.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
bracket