Dell C7765DN MFP Color Laser Printer - Manual (Page 87)

Dell C7765dn Security Target
- 83 -
the communication data from modification or disclosure.
a) SSL/TLS
According to the SSL/TLS communication which is configured by a system administrator using
the system administrator mode, SSL/TLS ensuring secure data transmission is supported. This
protects the security of document data, security audit log data, and TOE setting data on the
internal network.
By supporting SSL/TLS, the TOE can act as SSL/TLS server or SSL/TLS client. Moreover,
SSL/TLS can protect data transmission between the TOE and the remote from interception and
alteration. Protection from interception is realized by encrypting transmission data with the
following cryptographic keys. A cryptographic key is generated at the time of starting a session
and lost at the time of ending the session or powering off the MFD main unit.
Cryptographic key generated as SSLv3/TLSv1/TLSv1.2 upon every session
Specifically, one of the cryptographic suites below is adopted:
Cryptographic Suites of SSL/TLS Cryptographic Method and
Size of Secret Key
Hash Method
SSL_RSA_WITH_RC4_128_SHA RC4 / 128 bits SHA-1
SSL_RSA_WITH_3DES_EDE_CBC_SHA 3-Key Triple-DES / 168 bits SHA-1
TLS_RSA_WITH_AES_128_CBC_SHA AES / 128 bits SHA-1
TLS_RSA_WITH_AES_256_CBC_SHA AES / 256 bits SHA-1
TLS_RSA_WITH_AES_128_CBC_SHA256 AES / 128 bits SHA256
TLS_RSA_WITH_AES_256_CBC_SHA256 AES / 256 bits SHA256
Protection from the alteration is realized by HMAC (Hashed Message Authentication Code -
IETF RFC 2104) of SSL/TLS.
When SSL/TLS communication is enabled on the Web client, requests from the client must be
received via HTTPS. The SSL/TLS communication needs to be enabled before IPSec, SNMPv3,
or S/MIME is enabled or before security audit log data are downloaded by a system administrator.
b) IPSec
According to the IPSec communication which is configured by a system administrator using the
system administrator mode, IPSec ensuring secure data transmission is supported. This protects
the security of document data, security audit log data, and TOE setting data on the internal
network.
IPSec establishes the security association to determine the parameters (e.g. private key and
cryptographic algorithm) to be used in the IPSec communication between the TOE and the
remote. After the association is established, all transmission data among the specified IP
addresses are encrypted by the transport mode of IPSec until the TOE is powered off or reset. A
cryptographic key is generated at the time of starting a session and lost at the time of ending the
session or powering off the MFD main unit.