Dell Alienware 17 (Mid 2013) - Manual (Page 38)

38 | Replacing the Video-card Fan
Replacing the Video-card Fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at 
dell.com/regulatory_compliance.
Procedure
1 Connect the video-card fan cable to the system-board connector.
2 Place the video-card fan in the computer base and align the screws on the fan with
the screw holes on the computer base.
3 Tighten the captive screws that secure the fan to the computer base.
Postrequisites
1 Replace the battery. See "Replacing the Battery" on page 17.
2 Replace the base cover. See "Replacing the Base Cover" on page 15.
3 Follow the instructions in "After Working Inside Your Computer" on page 13.
book.book Page 38 Friday, June 28, 2013 3:27 PM