Vermont Casting VCS5037 - Manual (Page 23)

Page 5
Step 9: Attach Side Burner Lid
Parts Required:
Note:
Step 10: Attach Knobs
Parts Required:
Note:
(S/B-Single)
(1) Side Burner Lid (S/B-Single)
(2) #10-24 x 3/4” ( 1/4” Shank)*
*
Attach the lid marked (S/B-Single) to the Shelf Right top
marked VM-S/B using two #10-24 x 3/4” ( 1/4” Shank)
bolts. Align the holes at the back sides of the lid with the
holes located in the shelf top and insert a bolt in each.
If your unit is equipped with a side burner, please
refer to the instruction sheet included with the side
burner for installation instructions.
Depending upon your specific model, your grill
may require 5 or 6 knobs. Models
are equipped with five (5) knobs,
and models , 17, &
equipped with six (6) knobs.
Align the knobs on the valve stems and push inward until
the knob sits snugly on the stem.
Included with the Side Burner Kit
VCS4007: (5) Knobs VCS5007: (6) Knobs
VCS4017: (5) Knobs VCS5017: (6) Knobs
VCS4027: (5) Knobs VCS5027: (6) Knobs
VCS4037: (5) Knobs VCS5037: (6) Knobs
VCS4007, VCS4017,
VCS4027, & VCS4037
VCS5007 VCS50 VCS5027 VCS5037
are
Remove the Packing Tape from:
The Grease Cup
The Base Assembly (inside the grill)
The Warming Rack
For models VCS5007, VCS5017, VCS5027 &
VCS5037, remove the Packing Tape from the front pull-
out drawer.
Step 11: Remove the Packing Tape
Note:
Fig. 9
Bolts
Fig. 10
Fig. 11
VCS4007 / VCS4017 / VCS4027 / VCS4037 / VCS5007 / VCS5017 / 27 37 Assembly VCS50 / VCS50