Dell Vostro 220 (Late 2008) - Manual (Page 102)

102
Processor Heat Sink/Fan Assembly
3 Tighten the captive screws evenly to secure the heat sink/fan assembly to
the system board.
NOTICE:
Ensure that the assembly is correctly seated and secure.
4 Attach the heat sink/fan assembly cable to the system board (see "System
Board Components" on page 40).
5 Follow the procedure in "After Working on Your Computer" on page 45.
1 Phillips screwdriver 2 heat sink/fan assembly
3 heat sink/fan cable 4 system board fan connector
5 screw holes with rubber bushings 6 captive screws (4)