Bluetooth, Card, Removing a bluetooth card – Dell Vostro 1000 (Mid 2007) User Manual
Page 7: Replacing a bluetooth card
Back to Contents Page
Bluetooth®
Card
Dell™ Latitude™ 131L/
Dell Vostro™ 1000 Service Manual
Removing a Bluetooth Card
1.
Follow the procedures in
Before You Begin
.
2.
Locate the Bluetooth card cover.
3.
Press down on the cover's release latch.
4.
Rotate the cover to release it from the chassis.
5.
Disconnect the Bluetooth cable.
6.
Slide the Bluetooth card from the Bluetooth card cover.
Replacing a Bluetooth Card
1.
Slide the Bluetooth card into the Bluetooth card cover.
2.
Connect the Bluetooth cable.
3.
Align the Bluetooth card cover and press down firmly into place.
Back to Contents Page
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface
(such as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.