Dell 3008WFP Monitor - Manual (Page 24)

OSD Warning Messagess
NOTE: When using DVI source, the contrast adjustment is not available.
Back Push to go back to the main menu.
Mode Use and buttons to browse and to select Picture by Picture (PBP) "On" or "Off".
PBP Source Select an input signal for Picture by Picture (PBP). (DVI-1/DVI-2/HDMI/Composite/S-Video).
Use and buttons to browse and to select.
Preset Modes You can choose different color presets for different viewing modes.
Desktop mode is for desktop applications. (DVI input source only.)
sRGB mode emulate 72% NTSC color. (DVI input source only.)
Movie mode is suitable for movie playback. (Video input sources only. HDMI/Composite /S-Video )
Nature mode is suitable for nature scenes. (Video input sources only. HDMI/Composite/S-Video )
Use and buttons to browse and to select
Contrast Adjust the contrast level of the picture in Picture by Picture (PBP) Mode.
button reduce the contrast.
button increases the contrast.
NOTE: Contrast adjustment only available for video input.
Hue This function shifts the color of Picture by Picture (PBP) image to green or purple. This is used to adjust for desired flesh tone color.
Use and buttons to adjust the hue from '0' to '100'.
makes video image shade into greenish.
makes video image shade into purplish.
NOTE: Hue adjustment only available for video input.
Saturation Adjust the color saturation of Picture by Picture (PBP) image.
Use and buttons to adjust the saturation from '0' to '100'.
button makes the image look more monochrome.
button makes the image look more colorful.
NOTE: Saturation adjustment only available for video input.
Exit Menu Push to exit the OSD main menu.
When the monitor does not support a particular resolution mode you will see the following message :
or