Video source menu, Rf learning connections – Dell 5100MP Projector User Manual

Page 34

www

.del

com |

ppo

rt.

ll.

Using Your Projector

Video Source Menu

NOTE:

This menu is only available with S-video, Video (composite) signal

connected.

ATURATION

—Adjust a video source from black

and white to fully saturated color. Press to

decrease the amount of color in the image and

to increase the amount of color in the

image.
S

HARPNESS

—Press

to decrease the

sharpness and to increase the sharpness.

INT

—Press

to increase the amount of

green in the image and to increase the

amount of red in the image.

RF Learning Connections

Auto Learning to Change RF Channel Between

Remote Controller and Projector

• Power on the projector.
• Press the "Menu" button on control

panel, then enter to "

Management--

RF_Ch Learning " menu.

• Select

Yes with the control buttons to

enter the

Learning Standby mode. The

projector will switch to standby mode

for

RF Learning and display the RF

Learning menu.

• Open the battery cover on the remote

control and press the

Prgm button to

initiate the

RF Learning process for the

remote control and projector.

Back to Factory Default for the RF Channel

• Select Yes on RF Learning Setting

menu and then enter the

RF Reset to

Default menu. Select Reset to Default

Channel, the projector will back to the

factory default channel.