Dell Latitude D500 - Manual (Page 30)

Back to Contents Page
Speakers
Dell™ Latitude™ D500 Service Manual
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Remove the keyboard .
3. Remove the display assembly .
4. Remove the palm rest .
5. Disconnect the speaker connector from the system board connector.
6. Remove the M2.5 x 8-mm screw from the speakers.
7. Remove the M2.5 x 4-mm screw from the speakers.
8. Remove the speakers by pulling them straight up and out of the computer base.
9. Remove the reserve battery from the speakers.
Back to Contents Page
CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: Handle the speakers with care to avoid damaging them.
1 speaker 5 M2.5 x 4-mm screw
2 speaker connector 6 computer base
3 system board connector 7 M2.5 x 8-mm screw
4 reserve battery