Organizing your cables, Attaching the soundbar (optional) – Dell U3011 Monitor User Manual
Page 33
After you have completed connecting the DVI/VGA/DisplayPort cable, follow the procedure below to complete your monitor setup:
1.
Plug the power cables for your computer and monitor into a nearby outlet.
2.
Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see
Solving Problems.
3.
Use the cable slot on the monitor stand to organize the cables.
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See
for cable attachment,) use the cable management slot
to organize all cables as shown above.
Attaching the Soundbar (Optional)
To attach the Soundbar:
NOTE:
The graphics are used for the purpose of illustration only. Appearance of the computer may vary.
1.
Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.
2.
Slide the Soundbar to the left until it snaps into place.
3.
Connect the Soundbar with the DC power connector.
4.
Insert the mini stereo plug from the back of the Soundbar into the computer's audio output jack.