Setting up the monitor, Connecting the monitor – Dell U3011 Monitor User Manual
Page 32
Back to Contents Page
Setting Up the Monitor
Dell™ U3011 Flat Panel Monitor User's Guide
Attaching the Soundbar (optional)
Connecting the Monitor
To connect your monitor to the computer:
1.
Turn off your computer and disconnect the power cable.
2.
Connect either the white (digital DVI-D) or the blue (analog VGA) or the black (DisplayPort) display connector cable to the corresponding video port on
the back of your computer. Do not use the three cables on the same computer.
Use all the cables only when they are connected to three different
computers with appropriate video systems.
3.
Connect the USB uplink cable.
Connecting the white DVI cable and the USB uplink cable
Connecting the blue VGA cable and the USB uplink cable
Connecting the black DisplayPort
cable and the USB uplink cable
WARNING:
Before you begin any of the procedures in this section, follow the
Safety Instructions
.
NOTE:
USB uplink cable connection enables USB ports and card reader on the monitor to work.
NOTE:
Your monitor supports two DVI ports. You can choose the input source (DVI-D 1 or DVI-D 2) through the OSD menu's
Input
source select
option.