Dell Vostro 14 (5480, Late 2014) - Manual (Page 36)

SATA Operation Change the SATA controller
mode to either ATA or AHCI. Default: AHCI
Adapter Warnings Enable or disable the Adapter
Warnings. Default: Enable
Function Key Behavior Specifies the behavior of the
function key . Default: Function key
Battery Health Displays a message about the
battery health.
Miscellaneous Devices These fields let you enable or
disable various on-board devices.
Security
Table 4. Security
Set Asset Tag This field displays your system's asset tag. If the
asset tag is not already set, this field can be used to
enter it.
Set Admin Password Allows you to change or delete the administrator
password.
Set System Password Allows you to change or delete the system
password.
Set HDD Password Allows you to set a password on the computer's
internal hard drive (HDD).
Password Change Allows you to change the security password.
Password Bypass Allows you to bypass the system password and the
internal HDD password prompts during a system
restart/resume from hibernate state.
Boot
Table 5. Boot
Boot Priority Order Specifies the order of different devices in which the
computer will boot through at start up.
Legacy Boot Option Allows you to load legacy option. (Default:
Enabled)
Secure Boot Species if the UEFI secure boot option (Default:
Disabled)
Add Boot Option Allows the user to add an additional boot device.
Delete Boot Option Allows the user to remove an existing boot device
from the boot order.
Exit
This section allows you to save, discard, and load default settings before exiting from System Setup.
36