Ds1/e1 connection ports – Carrier Access Bridge/Router 3104s User Manual
Page 16
16
Adit 3104 - Release 1.6
Quick Start
Interface Connectors
DS1/E1 Connection Ports
Each DS1/E1 connection port is equipped with a standard RJ-48C (female) on the
Adit 3000 unit. Note: E1 will be available in a future release.
The pinouts are as follows:
DS1/E1 RJ-48C
The pinouts are as follows:
The LEDs are as follows (left LED only):
Pin
Name
Description
1
Receive Ring
Receive from DS1 network
2
Receive Tip
Receive from DS1 network
3 N/C
Not
connected
4
Transmit Ring
To DS1 network
5
Transmit Tip
To DS1 network
6-8
N/C
Not connected
State
Description
Off
Off line
Green
Normal
Red
Loss of Signal (LOS)
Yellow
Bipolar Violation (BPV)
Flashing Green
Loopback active
Flashing Yellow
Yellow Alarm (Remote Alarm Indication)
Flashing Red (Slow)
Loss of Frame (LOF) or Alarm Indication Signal (AIS)
Flashing Red (Fast)
Self-test Failure
1
8