Dell PowerVault ML6000 - Manual (Page 2)

Quantum : Replacement
6-68170-01 Rev A
May 2014
2 Installing a 14U Library in a Rack
4 For the procedure “Preparing Modules for Rack Installation”, follow these
steps:
a Remove all tape drives, power supplies, and all cords and cables from
the library modules. The modules are much easier to lift into the rack
without the additional weight of the tape drives.
WARNING: Without tape drives, tape cartridges, or power supplies, a 5U
Library Control Module weighs approximately 60 lbs (27.2 kg). A
9U Library Expansion Module, without tape drives, tape
cartridges, or power supplies, exceeds 65 lbs (29.5 kg).
To avoid serious injury, at least two people are required to safely
lift the modules.
b Do not remove the orange shipping restraint from the robot.
5 Follow the instructions for “Installing the Bottom Module in the Rack” in the
User’s Guide with the assembled 14U library. Do not take apart the 5U and
9U modules for this procedure. Follow the next step before powering on the
library.
6 Ensure the library is secured properly and the installation in the rack is
complete. Remove all shipping restraints before powering up the
library .