Replacing the antenna, Procedure, Post-requisites – Dell Inspiron 20 (3043, Mid 2014) User Manual
Page 61

Replacing the Antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Adhere the antenna modules to the display bezel and secure the antenna
modules with the Aluminium foil tapes.
2 Route the antenna cables through the routing guides on the display
bezel.
3 Connect the flex cables to the display board.
4 Adhere the tape and Aluminium foil tape to the antenna cables and
camera and control-buttons board cable.
5 Connect the control-buttons board cable to the control-buttons board
and secure it with the tape.
Post-requisites
1
Follow the instructions from step 7 to step 15 in “Replacing the
”.
2 Replace the
3 Follow the instructions from step 2 to step 6 in “Replacing the
61