Dell Inspiron 20 (3043, Mid 2014) - Manual (Page 34)

Removing the Power-Status
Light Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
Follow the instructions from step 1 to step 7 in “Removing the Back Cover ”.
Procedure
1 Lift the connector latch and disconnect the power-status light cable from
the power-status light board.
2 Peel the tape that secures the power-status light board to the display
bezel.
3 Remove the screws that secure the power status-light board to the
display bezel.
34