Expansion cards, Installing an expansion card – Dell OptiPlex 745c (Early 2007) User Manual
Page 52
Back to Contents Page
Expansion Cards
Dell™ OptiPlex™ 745c User's Guide
Your Dell™ computer supports a serial adapter and provides the following connectors for PCI and PCI Express cards.
l
Two PCI card slots
l
One PCI Express x16 card slot
l
One PCI Express x1 card slot
Installing an Expansion Card
If you are replacing a card, uninstall the driver for the existing card. See the documentation that came with the card for instructions.
1.
Follow the procedures in
Before You Begin
.
2.
Gently push the release tab on the card retention latch from the inside to pivot the latch open. The latch will remain in the open position.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
1 PCI card
1 PCI Express x16 card
2 PCI Express x1 card
3 PCI Express x1 card slot 4 PCI Express x16 card slot
NOTE:
Your Dell computer uses only PCI and PCI Express slots. ISA cards are not supported.
NOTE:
The serial port adapter for your mini tower computer also includes two PS/2 connectors.