Dell Vostro 410 (Late 2008) - Manual (Page 42)

42
Troubleshooting
To start the Hardware Troubleshooter:
Windows XP:
1 Click Start→ Help and Support.
2 Type hardware troubleshooter in the search field and press
to start the search.
3 In the Fix a Problem section, click Hardware Troubleshooter.
In the Hardware Troubleshooter list, select the option that best describes the
problem and click Next to follow the remaining troubleshooting steps.
Windows Vista:
1 Click the Windows Vista Start button , and click Help and Support.
2 Type hardware troubleshooter in the search field and press
to start the search.
3 In the search results, select the option that best describes the problem and
follow the remaining troubleshooting steps.
Dell Diagnostics
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions that shipped with your computer.
When to Use the Dell Diagnostics
If you experience a problem with your computer, perform the checks in
Lockups and Software Problems (see "Lockups and Software Problems" on
page 46) and run the Dell Diagnostics before you contact Dell for technical
assistance.
It is recommended that you print these procedures before you begin.
NOTICE:
The Dell Diagnostics works only on Dell computers.
NOTE:
The Drivers and Utilities media is optional and may not ship with your
computer.
See your Service Manual at support.dell.com to review your computer’s
configuration information, and ensure that the device that you want to test
displays in the system setup program and is active.
Start the Dell Diagnostics from your hard drive or from the
Drivers and
Utilities media.
book.book Page 42 Wednesday, March 5, 2008 9:45 PM