Dell S199WFP Monitor - Manual (Page 5)

24-pin Digital-only DVI Connector
Note: Pin 1 is at the top right.
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID)
using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can
select different settings if required.
10 GND-sync
11 GND
12 DDC data
13 H-sync
14 V-sync
15 DDC clock
Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment
1 T.M.D.S. Data 2- 9 T.M.D.S. Data 1- 17 T.M.D.S. Data 0-
2 T.M.D.S. Data 2+ 10 T.M.D.S. Data 1+ 18 T.M.D.S. Data 0+
3 T.M.D.S. Data 2 Shield 11 T.M.D.S. Data 1 Shield 19 T.M.D.S. Data 0 Shield
4 No Pin 12 No Pin 20 No Pin
5 No Pin 13 No Pin 21 No Pin
6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield
7 DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock +
8 No Connect 16 Hot Plug Detect 24 T.M.D.S. Clock -
General
Model number S199WFP
Flat Panel
Screen type Active matrix - TFT LCD
Screen dimensions 19 inches wide(19-inch wide viewable image size)
Preset display area:
Horizontal 408mm / 16.1inches (minimum)
Vertical 255mm / 10.0 inches (minimum)
Pixel pitch ~ 0.2850mm
Viewing angle 160° (vertical) typ, 160° (horizontal) typ
Luminance output 300 CD/m ²(typ)
Contrast ratio 1000 to 1 (typ)
Faceplate coating ARC-Glare (2H)
Backlight CCFL (4) edgelight system
Response Time 5ms typical