Dell Latitude C610 - Manual (Page 44)

System Board: Dell Latitude C610/C510 Service Manual
file:///C|/Work%20Area%20-%20A/E%20DOC%20Posting/latc610/service%20manual/sysboard.htm[2/1/2013 11:00:52 AM]
Back to Contents Page
System Board
Dell™ Latitude™ C610/C510 Service Manual
Removing the System Board
Replacing the System Board
Removing the System Board
The system board's BIOS chip contains the service tag sequence, which is also visible on a barcode label on the bottom of the
computer. The replacement kit for the system board includes a CD that provides a utility for transferring the service tag
sequence to the replacement system board.
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed
batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on
the computer.
NOTICE: Read " Preparing to Work Inside the Computer " before performing the following procedure.
1. Remove the hard drive .
2. Remove the keyboard .
3. Remove the display assembly .
4. Remove the palm rest .
5. Remove the microprocessor thermal cooling assembly .
6. Remove the microprocessor .
7. Remove the modem , memory modules , and Mini PCI card .
8. Turn the computer over, and remove the six M2.5 x 5-mm screws labeled "circle B" that secure the system board to
the bottom case.
9. Remove the three M2.5 x 5-mm screws labeled "circle B" that secure the fan guard to the bottom case.
System Board Screw Removal