Dell Alienware M11x R3 (Early 2011) - Manual (Page 81)

CHAPTER 5: TROUBLESHOOTING
79
Software Diagnostic Tools
Enhanced Pre-Boot System Assessment (ePSA)
The computer runs the Enhanced Pre-boot System Assessment (ePSA), a series of initial tests
of your system board, keyboard, display, memory, hard drive, and so on.
To invoke ePSA:
1. Turn on (or restart) your computer.
2. Shut down and restart the laptop. When the Alienware logo appears, press
immediately.
NOTE: If you wait too long and the operating system logo appears, continue to wait until
you see the Microsoft
® Windows ® desktop; then, shut down your computer and try again.
3. Select Diagnostics from the menu and press .
4. Follow the instructions on the screen.
If a failure is detected, the computer stops and beeps.
• To stop the assessment and restart the computer, press ;
• To continue to the next test, press ;
• To retest the component that failed, press .
If failures are detected during ePSA, write down the error code(s) and contact Alienware (for
more information, see “Contacting Alienware“ on page 113).