Vertical Communications 8324S - Manual (Page 89)

Sending And Receiving
Non-Verbal Messages
8.1 Message Waiting Light and Messaging
If the system installer designates your LCD speakerphone as a central
message desk or programs it to have message-wait originate ability, you
can turn on the message-waiting light of any other telephone. This light
lets that telephone user know that you have a message for him or her. In
addition to the message waiting light, leaving a message indication at a
station that is a prime intercom, also causes the dial tone at that station to
sound in a broken manner when the station user takes his or telephone
off-hook.
If a telephone that receives a message has a DSS button that is
programmed to call the station that left the message, the light next to that
DSS button on the message-receiving station will flash.
•
To turn on the message-waiting light (and a broken dial tone) at
another station that is idle or busy,
1. Press INTERCOM.
2. Dial ✳ 3.
3. Dial extension number of station to be alerted. The
message-waiting light of called station will flash.
•
You can also turn on the message-waiting light and broken dial
tone at another station when that station is busy,
1. Hear the busy tone and remain on the line.
2. Press MSG.
3. Hang up.
8
GCA70–250 Sending And Receiving Non-Verbal Messages
LCD Speakerphone Reference Guide 8 – 1
telemanuals . com